FFMPEG windows build procedure
From Hawk Wiki
#!/bin/sh
# How to compile ffmpeg/x264 binaries for both 32bit and 64bit on Windows
#
# At first, you should install Git into your Windows.
# 1. Download Git from http://msysgit.googlecode.com/files/Git-1.7.4-preview20110204.exe
# 2. Doubleclick Git-1.7.4-preview20110204.exe
# 3. "Welcome to the Git Setup Wizard" : Next>
# 4. "Information" (GPLv2 descliption) : Next>
# 5. "Select Destination Location" : C:\Git (or where you want) and Next>
# 6. "Select Components" : all checks off and Next>
# 7. "Select Start Menu Folder" : check "Don't create a Start Menu folder" and Next>
# 8. "Adjusting your PATH environment" :
# check "Run Git and included Unix tool from the Windows Command Prompt" and Next>
# * This method has the possibility to cause some trouble to your system.
# When it happens, uninstall Git via ControlPanel.
# If you know how to edit /etc/profile, you will choose "Use Git Bash only".
# 9. "Configuring the line ending conversions" :
# check "Checkout as-is,commit as-is" and Next>
#
# Next, you have to get latest MSYS, mingw-w64 binaries, pkg-config, subversion, nasm,
# yasm, and the others.
# I recommend you to use XhmikosR's toolchain.
# You will be able to get all dependencies at once.
# 1. Go to http://xhmikosr.1f0.de/index.php?folder=dG9vbHM=
# 2. Download MSYS_MinGW_GCC_***_x86-x64_Full.7z
# * You should download MSYS_MinGW_GCC_***_x86-x64_'Full'.7z because some dependencies
# are not included in MSYS_MinGW_***_x86-x64.7z(e.g. perl.exe).
# 3. extract it with 7zip, and put it on the place that you want (e.g. C:\MSYS).
# 4. Doubleclick C:\MSYS\msys.bat
# * If you want to use other MinGW, edit /etc/fstab.
#
# Now, you finished all the preparations to run this script.
# Save this script into $HOME as 'my_build.sh', and type './my_build.sh' on bash.
# ----------------------set valuables------------------------
MY_BUILD=${HOME}/build
MY_X86=${MY_BUILD}/x86
MY_X64=${MY_BUILD}/x64
# -----------------download source codes------------------
mkdir -p ${MY_BUILD}/src
cd ${MY_BUILD}/src
#git clone git://git.libav.org/libav.git libav
git clone git://git.videolan.org/x264.git x264
#svn co http://ffmpegsource.googlecode.com/svn/trunk/ ffms2
git clone git://github.com/mstorsjo/vo-aacenc.git
git clone git://github.com/mstorsjo/vo-amrwbenc.git
wget http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz
wget http://downloads.xiph.org/releases/ogg/libogg-1.2.2.tar.gz
wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.2.tar.bz2
wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2
wget http://downloads.xiph.org/releases/speex/speex-1.2rc1.tar.gz
wget http://openjpeg.googlecode.com/files/openjpeg_v1_4_sources_r697.tgz
wget http://downloads.sourceforge.net/project/opencore-amr/opencore-amr/0.1.2/opencore-amr-0.1.2.tar.gz
wget http://downloads.sourceforge.net/project/faac/faac-src/faac-1.28/faac-1.28.tar.bz2
cp -r ./ $MY_X64
wget http://www.libsdl.org/release/SDL-1.2.14.tar.gz
wget http://www.openssl.org/source/openssl-1.0.0d.tar.gz
wget http://rtmpdump.mplayerhq.hu/download/rtmpdump-2.3.tgz
wget http://webm.googlecode.com/files/libvpx-v0.9.6.tar.bz2
wget http://downloads.xvid.org/downloads/xvidcore-1.3.1.tar.gz
#wget http://code.entropywave.com/download/orc/orc-0.4.11.tar.gz
#wget http://diracvideo.org/download/schroedinger/schroedinger-1.0.10.tar.gz
cp -r ./ $MY_X86
cd $MY_X86
for i in ./*gz; do tar zxvf $i; done
for i in ./*.tar.bz2; do tar jxvf $i; done
rm ./*gz ./*.tar.bz2
cd $MY_X64
for i in ./*gz; do tar zxvf $i; done
for i in ./*.tar.bz2; do tar jxvf $i; done
rm ./*gz ./*.tar.bz2
# ------------compiling external libraries for ffmpeg---------
# *I don't know how to compile OpenCV and Frei0r.
# ===only 32bit ===
# note:
# The following libraries are able to compile only on 32bit.
# If you want to compile them on 64bit, write a pathch yourself and send it to the devs.
#Compiling SDL (ffplay requires this as renderer)
# note:
# It becomes impossible for me to link SDL libraries statically with ffplay
# because of some recent changes. thus you have to copy SDL.dll to the folder
# in your PATH.(26/03/2011)
cd ${MY_X86}/SDL-*
./configure --prefix=/mingw/i686-pc-mingw32
make clean && make && make install
cp /mingw/i686-pc-mingw32/bin/SDL.dll /usr/local/bin/
#Compiling OpenSSL (librtmp requires this)
cd ${MY_X86}/openssl-*
# note:
# for openssl, the first 'C' of Configure is a capital letter.
./Configure mingw --prefix=/mingw/i686-pc-mingw32
make && make install
#Compiling librtmp(rtmpdump)
cd ${MY_X86}/rtmpdump-*
make prefix=/mingw/i686-pc-mingw32 SYS=mingw SHARED=no
make install prefix=/mingw/i686-pc-mingw32 SYS=mingw SHARED=no
# note:
# librtmp links libws2_32 and libwinmm on MinGW, but it is not written in librtmp.pc.
# And, ffmpeg's configure requires pkg-config to check librtmp.
# Thus you should edit librtmp.pc as follows.
sed -i -e 's/Libs: -L${libdir} -lrtmp -lz/Libs: -L${libdir} -lrtmp -lz -lws2_32 -lwinmm/g' /mingw/i686-pc-mingw32/lib/pkgconfig/librtmp.pc
#Delete orc and schroedinger compile(20110421)
#Compiling libvpx
#20110313:update libvpx version from 0.9.5 to 0.9.6
cd ${MY_X86}/libvpx-*
./configure --target=x86-win32-gcc --cpu=i686 --disable-examples --enable-runtime-cpu-detect
make clean && make
cp libvpx.a /mingw/i686-pc-mingw32/lib/
mkdir -p /mingw/i686-pc-mingw32/include/vpx
cp ./vpx/*.h /mingw/i686-pc-mingw32/include/vpx/
#Compiling xvid
#20110325:update xvidcore version from 1.3.0 to 1.3.1
cd ${MY_X86}/xvidcore/build/generic
./configure
make
cp =build/xvidcore.a /mingw/i686-pc-mingw32/lib/libxvidcore.a
cp ../../src/xvid.h /mingw/i686-pc-mingw32/include/
# === both 32bit and 64bit ===
#Compiling lame
cd ${MY_X86}/lame-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared --enable-nasm
make clean && make && make install-strip
cd ${MY_X64}/lame-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32
--disable-shared --enable-nasm
make clean && make && make install-strip
#Compiling faac
# note:
# faac is incompatible with GPL/LGPL.
cd ${MY_X86}/faac-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared --without-mp4v2
make clean && make && make install-strip
cd ${MY_X64}/faac-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared --without-mp4v2
make clean && make && make install-strip
#Compiling opencore-amr
# note:
# opencore-amr's license(Apache 2.0) is compatible with GPLv3 or later.
cd ${MY_X86}/opencore-amr-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
cd ${MY_X64}/opencore-amr-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
#Compiling vo-aacenc
# note:
# vo-aacenc's license(Apache 2.0) is compatible with GPLv3 or later.
# vo-aacenc-0.1.0.tar.gz includes some clitical issues.
# thus you should get latest source code from git repo.
cd ${MY_X86}/vo-aacenc
autoreconf
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
cd ${MY_X64}/vo-aacenc
autoreconf
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
#Compiling vo-amrwbenc
# note:
# vo-amrwbenc's license(Apache 2.0) is compatible with GPLv3 or later.
cd ${MY_X86}/vo-amrwbenc
autoreconf
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
cd ${MY_X64}/vo-amrwbenc
autoreconf
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
#Compiling libogg (libtheora/libvorbis/speex requires this)
cd ${MY_X86}/libogg-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
cd ${MY_X64}/libogg-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
#Compiling libtheora
cd ${MY_X86}/libtheora-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
cd ${MY_X64}/libtheora-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
#Compiling libvorbis
cd ${MY_X86}/libvorbis-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
cd ${MY_X64}/libvorbis-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
#Compiling speex
cd ${MY_X86}/speex-*
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared --enable-sse
make clean && make && make install-strip
cd ${MY_X64}/speex-*
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared --enable-sse
make clean && make && make install-strip
#Compiling openjpeg
# note:
# Compiling openjpeg is weird.
cd ${MY_X86}/openjpeg_*
./configure && make clean
./configure --prefix=/mingw/i686-pc-mingw32 --disable-shared
make clean && make && make install-strip
# note:
# The .pc files of openjpeg-1.4.0 are installed into /usr/lib/pkgconfig
# instead of install-prefix/lib/pkgconfig.
# You should move these files into install-prefix/lib/pkgconfig.
mv /usr/lib/pkgconfig/libopenjpeg*.pc /mingw/i686-pc-mingw32/lib/pkgconfig/
cd ${MY_X64}/openjpeg_*
./configure && make clean
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --disable-shared
make clean && make && make install-strip
mv /usr/lib/pkgconfig/libopenjpeg*.pc /mingw/x86_64-w64-mingw32/lib/pkgconfig/
#Compiling libx264
# Edit configure line assume r1995 or later(20110514)
cd ${MY_X86}/x264
./configure --prefix=/mingw/i686-pc-mingw32 --disable-cli --enable-static --disable-gpac --disable-swscale --enable-win32thread --enable-strip
make clean && make # or make fprofiled VIDS='/path/to/file.y4m'
make install
cd ${MY_X64}/x264
./configure --prefix=/mingw/x86_64-w64-mingw32 --host=x86_64-w64-mingw32 --cross-prefix=x86_64-w64-mingw32- --disable-cli --enable-static --disable-gpac --disable-swscale --enable-win32thread
make clean && make # or make fprofiled VIDS='/path/to/file.y4m'
make install
#compile ffmpeg final working code
cd ${MY_BUILD}/src
git clone git://git.videolan.org/ffmpeg.git ffmpeg_latest
cd ffmpeg_latest
PKG_CONFIG_PATH=/mingw/i686-pc-mingw32/lib/pkgconfig/
./configure --prefix=/mingw/i686-pc-mingw32 --disable-doc --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-w32threads --enable-runtime-cpudetect --enable-memalign-hack --enable-avisynth --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfaac --enable-libmp3lame --enable-libopenjpeg --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvpx --enable-libx264 --enable-libxvid --disable-decoder=libvpx --disable-hwaccels --cpu=i686 --disable-debug --extra-cflags=-fno-strict-aliasing --enable-avfilter
make
make install
PKG_CONFIG_PATH=/mingw/x86_64-w64-mingw32/lib/pkgconfig
./configure --prefix=/mingw/x86_64-w64-mingw32 --arch=x86_64 --disable-doc --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-w32threads --enable-runtime-cpudetect --enable-memalign-hack --enable-avisynth --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfaac --enable-libmp3lame --enable-libopenjpeg --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvpx --enable-libx264 --enable-libxvid --disable-decoder=libvpx --disable-hwaccels --disable-debug --extra-cflags=-fno-strict-aliasing --enable-avfilter
